Solutions by market

Built for how the building performs

Every building type puts its latent load somewhere different. Viking OA is selected at that condition and holds supply dewpoint as low as 43°F, so the rest of the system carries sensible load only.
43°F

Supply dewpoint

3–80 tons

Viking OA range

AHRI 920

Certified DX-DOAS

Kentucky

U.S.-made, employee-owned

Choose Your Building Type

Six markets, one airside platform

Pick the building type to see the design condition, the code references and the Viking configuration that fits.

Mission-critical

Data Centers

CRAH coils run dry by design, which makes the DOAS the only point of latent control in the building. Hold dewpoint to the ASHRAE TC 9.9 envelope.

Campus air management

K–12 Education

Latent load is set by the roster, not the thermostat. Condition ventilation air independently, reset it with occupancy and stay dry all summer.

Hotels · Multifamily

Lodging & Multifamily

Continuous bathroom exhaust means continuous make-up air. Deliver it neutral and dry so PTACs and fan coils carry sensible load only.

Kitchen make-up air

Restaurants

The hood sets the ventilation rate and the dining room pays the latent bill. Make-up interlocked to the hood keeps the kitchen negative.

RTU rollouts

Retail

Take ventilation off the rooftop unit entirely. Reset it with traffic and land it on a KCC curb adapter, one drawing repeated across the rollout.

Labs · Healthcare · Cleanrooms

Critical Environments

Once-through supply at a controlled dewpoint, with tight-band reheat and pressure cascades that hold through every door cycle.
The common thread

Different buildings, the same problem

01

Select at the real condition

95°F DB / 78°F WB at an SHR of 0.70 or below, not the 80°F / 67°F WB rating a mixed-air rooftop unit was built around.
02

Control dewpoint

Modulating hot-gas reheat holds supply dewpoint as low as 43°F without overcooling the space.
03

Hold pressure

VFD supply fan reset against exhaust, door cycles and space differential keeps infiltration from bypassing control.
04

Land it once

The unit, the curb and the corner weights are engineered together and published in IOM-A001.
TALK TO KCC

One call to a rep who answers.

Not sure which market page fits your project? KCC Applications Engineering reviews the design condition with your local rep. One call.